Bad Looking Switch Board

Fill all empty places with Glue or Plaster of Paris

  • Take paper napkin (kind of tissue easily available at stores in various designs)
  • cut it according the size of your board.
  • Apply white glue on whole switch board except switches.
  • paste paper napkin on board with very soft hand.

cut extra paper napkin with cutter but very gently.

now apply glue brush on whole board, don’t leave bubbles, glue should spread properly specially on edges.

After drying spray lacquer on whole area, clean switches with thinner or nail clr remover.

Final Look

(By Atiya Fateh)